FOUNDATIONS 

EPS 120 Perimeeter

EPS 120 Perimeeter Pluss*

EPS Foam 200*

 Vundamendid
 EPS 120 Perimeeter and EPS 120 Perimeter Plus are suitable for combating cold expansion – for use in the construction of foundations, sockets, the inner and outer walls of cellars, and pipe systems. Horizontal panels are installed onto compacted ground around the edge of the foundation at a downward slant so as to direct rainfall water away from the building. Vertical panels are installed on the external wall of the foundation. 

 The products are made of special raw materials, which ensure good moisture-resistant properties. The panels can be installed directly into the ground and do not require any additional hydro-isolation.

 
 EPSFoam200 is suitable for combating cold expansion in places where heavier ground or construction loads are applied to the insulation material, such as deep foundations, cellar walls, terraces, parking lots, yards, footpaths and technical constructions. 
       

 Benefits:
•   Very good moisture-resistant properties – can be installed directly into the ground
•   High compressive strength – can withstand heavy ground pressure
•   Tongue-and-groove joints ensure a more convenient installation

*Products EPS 120 PERIMETER PLUS and EPS Foam are equipped with tongue-and-groove joints.

Quality

Method of experiment

Unit

EPS 120 Perimeeter

EPS Foam 200

Thermal conductivity λᴅ

EN 12667

W/mk

0,035

0,033

Compressive strength at 10% def (short-term)

EN 826

kPa

≥120

≥200

Compressive strength at 2% def (long-term)

 

kPa

≥36

≥60

Water absorption

EN 13501-1

%

≤2

≤1,5

Length x width of panel

mm

1200x1000

1085x615

Thickness of panel

mm

 50  

100 

50 

100

No. of panels in bundle

m2

12

6

6,66

3,33

No. of panels in bundle

m3

0,6

0,6

0,33

0,33